For HYUNDAI Tucson 2016-2019 2X LED Headlight Kit H7 White 6K Low Beam Bulbs NEW

Notes:
Please check whether it is fit your vehicle before purchase.


Compatiable with H7
Used as Hight/Low Beam and Fog Light, DRL(Daytime Running Light)


CHUSYYRAY Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .

Description:
The compatible vehicle lists is only partial lists,no fully included due to Ebay listing compatible vehicles limitation.
IF your car plug is the H7,the item is fit your car.
Specification:
Plug Type: H7 PX26D,single beam
Light source: LED chip
Light source: 3030 lamp beads
Lumens: Actual 800lm*2pcs
Waterproof index: IP67
Working voltage: 9-36v
Beam angle: 360°
Color Temperature: White 6000K
Color: Sliver
Light color: white
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Lifetime: 50000 hours above
Usage: Fog light, brake light, turn signal

Feature:
- (2pcs/set) H7 COB LED headlight conversion kit.
- Especially bright COB chip (USA) 360 degree clear beam no blind zone.
-Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light.
-Xenon white light reflect road paint/signs better to show clearer road situation.
- All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
-Built-in constant current CPU, instant full brightness without start-up relay.
-No delay to light up, faster on/off response time
-Aluminum heat sink design, built-in automotive circuit to prevent electronic interference.
-The model is the same as factory light, no need to change car wire rute, just Plug and Play, NO modification r
- Mini integrated Built-in drive, small size, fanless pure aluminum body heat dissipation, non-destructive installation

Package Included:
2 x H7 LED Car headlights
1x Packing box (The style of Packing Box is Random.)

Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.