LEDwholesalers 24V 32.8-ft IP66 Water-Resistant 90W COB High-Output Constant-Current 90-CRI Flexible 4800-LED Strip Light with Dot-Free Uniform Glow in Silicone Sleeve, Warm-White 3000K, 20279WW-30K

This high quality 24-volt, flexible single color LED strip is perfect for nearly any applications including mood and accent lighting. It features COB design with an ultra-high LED density, especially suited for applications that call for uniform glow throughout the length of the LED strip, without any distinct hot spots.

The clear silicone sleeve protects the LED strip from moisture and dust, as well as from physical contact with delicate components on the LED strip.

Note

• Must be used with compatible power supply and optional dimmer or controller.
• Avoid exposure to direct sunlight.
• Minimum bending radius is 5 cm (2").
• Unused wires of LED strip must be isolated to prevent potential short circuit.
• Unroll LED strip completely before powering on.
• Test all components before cutting or permanently mounting the strip.
• Do not lengthen LED strip by directly connecting additional strips to it; additional lengths should be wired in parallel (controller, if used, and power supply must be of adequate capacity).
• Specs based on factory testing of 1m lengths; voltage drop is greater on 12V strips than their respective 24V versions.
• For best results, power LED strip from both ends whenever possible.
• Due to its high power, it is strongly recommended to mount LED strip on aluminum channels to facilitate proper heat dissipation.

Specifications

• LED Quantity: 4800
• Input Voltage: 24 VDC
• Power: 90 W
• Beam Angle: 180°
• Dimmable: Yes
• CCT: Warm White 3000K
• Luminous Flux: 8100 lm
• CRI: 90
• Operating Temp.: -20～50 ºC
• Strip Width: 10 mm
• Strip Length: 32.8 ft (10 m)
• PCB Color: White
• Wire Leads: 18 AWG
• IP Rating: IP66
• Compliance: UL, CE, RoHS
• Lifespan: Up to 50,000 h
• Warranty: 1 year