Crown CDi2000 800w 70V Commercial Amplifier+4) Black 30w JBL Wall-Mount Speakers

Package Includes:
(1) Crown CDi2000 2-Channel, 800w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp
(2) Pairs of JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers

Features of CDI2000:
Crown CDi2000 2-Channel, 800w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp
Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.
Switch-mode universal power supply.
Intuitive front-panel LCD screen for quick, easy configuration.
Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.
Up to 20 user defined DSP presets are available.
Specifications:
Channels: 2
Sensitivity (for full rated power at 8 ohms): 1.4V
Rated Power Output (per channel @ 4 ohms): 800W Stereo
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)
THD: < 0.5%
Damping Factor (20 Hz to 400 Hz): > 500
Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB
Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced
Dimensions: 3.5" x 19" x 12.25"
Weight: 22.0 lbs
IEC Power Connector: 15A

Owner's Manual

Features of Control 25-1:
2 JBL Control 25-1 5.25" 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar
5.25" Woven-Fiberglass LF Drivers
0.75" PEI Diaphragm Tweeters
200W RMS at 8 Ohms
Durable, Weatherized Enclosures
InvisiBall Mounting Hardware
Zinc-Plated Grilles
Good for Off-Axis Listening
60 Hz to 20 kHz Frequency Response
Specifications:
Power Rating: 200 W continuous program (2 h). 100 W (400 W peak), continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h)
Nominal Impedance: 8 ohms (THRU setting)
Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak
Frequency Response± 3dB: 85 Hz to 17 kHz
Frequency Response ±10 dB: 60 Hz to 20 kHz
Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz)
Coverage Angle: 100° x 100°
Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz)
Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz)
Crossover Type: 2nd order low-pass, 2nd order high-pass
Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion loss < 0.94 dB at any tap setting. Thru setting: 8 Ohms nominal
Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings)
LF Driver Size: 5.25" / 135 mm
HF Driver Size: 0.75" / 19 mm
Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former
Enclosure Material: High-impact polystyrene (HIPS)
Grille: Highly zinc-plated, finished in durable TGIC polyester powder-coating
Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6,