Lorell, 3,200 lb Capacity Riveted Steel Shelving, 1 Each, Black

I ordered on a Sunday and it arrived less than 48 hours later on Tuesday. I used Marketplace seller BisonOffice for my purchase and it was an impressive nice quick delivery! From unbox to finish the item itself it took me 1.5 hours to install. (About half an hour of that time was spent taking down my old shelving and canisters and then putting the canisters on the new shelving.) I am using it for pantry shelving and it holds eight of the 24 Cup 1339 vintage Tupperware canisters per shelf very comfortably and I can stack on those as many of the 17 Cup 1706 canisters or 7 Cup 1204 canisters that I want along with the smaller containers. The shelving is very sturdy and can hold all the weight! The downside for some might be that it didn't come with directions. I just looked at the picture here on Walmart and it was easy to figure out. The corner posts need to have small rivet side DOWN. The shelf supports need to have short side UP to hold the shelf properly. The four corner posts are actually eight pieces, with a galvanized steel connector between them for one vertical unit. The only downside for me was the bottom of the leg caps are too small/loose for the product. If the shelf is ever moved in the future they will fall off/get lost as I didn't take the extra time to glue them on. The only tool I used was a hammer to make sure the shelf supports were in the rivet holes nice and snug and I'm confident if I ever want to move those shelves around in future I can reverse process and they will come back out easy enough for me. I recommend this shelf (and Marketplace seller) and if I need another shelf I will purchase another one here. The shelf has a nice sleek design suitable for the house because those rivet holes are hidden so it makes it look nice.