StewMac Carbide Downcut Inlay Router Bit, 1/8" dia.

The best for inlay work and saddle slotting! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.

Width of cut 1/8" (3.18mm)

Depth of cut 1/2" (9.53mm)

Each bit is 1-1/2" (38.10mm) long with a 1/8" (3.18mm) shank for Dremel and other rotary tools.

Use this inlay bit for removing wood in the middle of your inlay work, and save the smaller inlay bits for the fine details.