Transmission Kickdown Cable Kit, 4L60 Chevy/GM, BLK

Fitments for popular GM, Ford, and Mopar automatic transmissions. Available in bright/braided stainless steel or gloss black/poly coated. All cable housings feature PTFE liner for smooth cable actuation. Cables and housing are both cut to fit to suit any custom installation. Perfect for transmission swaps to provide accurate kickdown control. Connects to most carburetor linkages/brackets for easy setup. Compliments and matches most aftermarket throttle cables available. Includes threaded adjuster, carb stud adapter, cable ferrule, and more. Ensure Your Transmission Swap Success with Our Kickdown Cable Kit The transmission kickdown is a critical part of your transmission’s operation. The cable assembly (and on some older vehicles an actual medal rod/linkage) connects to the engine’s carburetor or throttle body EFI system and provides a downshift, or “kickdown” to what many refer to as a “passing gear.” This performs a downshift to the transmission automatically when the accelerator pedal is depressed to wide open throttle (WOT), placing the engine’s output in the peak power and torque range for maximum acceleration to pass a vehicle. This is all accomplished without the driver having to touch the shift lever in the car, possibly downshifting too far (all the way to first gear) or potentially moving the shift lever to neutral or reverse, causing catastrophic damage. When swapping a different transmission behind your project’s engine you will often find the factory kickdown linkage or passing gear cable will not interface with your new transmission, or the factory transmission kickdown linkage that came with your donor transmission will not fit your vehicle (exhaust or crossmember interference, etc.). Of course, most reman transmissions and performance transmissions do not come with shift levers and kickdown setups of any sort, relying on the installer to figure everything out. In any of these cases, a universal cable-type kickdown assembly is your best bet to obtain a functional transmission kickdown cable adjustment for your engine and transmission combo. Transmission Kickdown Cable Kits Fit Popular GM, Ford, and Mopar Transmissions Available for many of the most popular swap transmissions, our kickdown cable kits are an excellent value, having all the same great features as others on the market for less! We currently have kick down cable kits for GM’s TH350, 700R4, and 4L60 automatic transmissions; Ford C4 and C6 automatic transmissions; and Mopar 727 and 904 automatic transmissions. Be it a TH350 kickdown cable or other popular transmission, these kickdown cables are real problem solvers! These kick down cable kits feature a cut-to-fit outer sheath and cable (can be cut with hacksaw or fine cutoff wheel), providing the perfect length, and routing no matter the engine/transmission combination and engine bay obstacles. They are available in either braided stainless steel or black polyethylene covered outer finishes with matching aluminum fittings. The PTFE inner lining provides smooth cable actuation in any environment and through multiple bends making routing a breeze. Each cable kit includes the necessary mounting brackets/connections for the transmission of choice along with a standard adjustable cable end to attach to your carburetor or throttle body-style EFI system, making your transmission kickdown cable install easy. Most factory carburetor linkage brackets will accommodate these cable-style kickdown kits, but for those that need a mounting solution, we offer numerous throttle cable brackets to help adapt your kick down cable to any induction system. We also offer matching throttle cables if you’re looking to clean up your engine’s throttle and kickdown setup or converting from a mechanical throttle pedal to a cable operated throttle pedal at the same time as your trans swap. Kits for GM Tuned Port EFI applications are also available