FG-200 DDS Function Signal Generator Frequency Counter 0.01Hz - 500KHz Signal Source Module Sine+Square+Sawtooth Waveform Have a filter (can be opened and closed) to suit output of sine and pulse . sine , , triangle , forward sawtooth , reverse sawtooth , etc. It is especially designed for those professional worker. Compact size, complete functions, simple operation, easy to carry. It can be powered by a adapter or a 3.7V battery. Together with an oscilloscope, it can be used for electronic circuit test and debugging, frequency characteristics and impulse response test and measurement of audio amplifiers. Due to good accuracy and frequency stability of DDS, it is also very suitable for oscilloscope time factor calibration. output is suitable for oscilloscope attenuator and probe pulse characteristic adjustment.
Specifications:
4. Frequency : sine 0.01Hz- 500.00kHz (with further increase in frequency, output amplitude will decrease), other waveforms 0.01Hz-100.00kHz (but does not limit upper limit of adjustable frequency, if distortion and jitter requirements are not high, use of frequency can be further increased).
Package Weight: 245g / 8.64oz
6. Sine distortion: <1% below 1kHz, <0.5% above 1kHz.
11. there are filters can be turned on and off, can be well adapted to sinusoidal and pulse waveform output.
Type: without Antenna / with Antenna (Optional)
5. Resolution: 0.01Hz.
1. Output waveforms: sine , , triangle , forward sawtooth , reverse sawtooth , ECG , exponential rise, exponential fall, Lorentz pulse, Gauss pulse, Sinc pulse, half-, full-, Schumann , noise , and so on 15 kinds of waveforms.
Package Size: 160 * 125 * 35mm / 6.29 * 4.92 * 1.37in
main technical parameters:
7. Output amplitude: Maximum ±10V (P-P).
2. supply: DC4-9V, DC5V is recommended when using adapter, 3.7V battery is recommended when using battery .
Item Size: 140 * 80 * 26mm / 5.51 * 3.15 * 1.02in
Item Weight: 144g / 5.07oz
8. output impedance: 50 ohms.
3. Current: 180MA at voltage 5V
9. offset: maximum ±10V, with shutdown function.
Material: ABS
10. All setup parameters can be saved.
Package List:
1 * Signal Generator
1 * User Manual (English)
1 * BNC Clip Cable
1 * USB Cable
WARNING: 