Alpha V-Series Wet Cutting Profiler Full Bullnose 1 1/2"
Create the Perfect Bullnose Edge Every time
Size: 1 1/2" (4.0cm)
Arbor: 5/8"-11 Threaded
Shape: Bullnose
Maximum RPM: 3,500
Shape: Bullnose
Recommended For: Granite, Quartz Engineer Stone, Concrete, Porcelain
Features
Create A Perfect Bullnose, Round over Edge Treatment
Use On Granite, Engineered Stone, Marble, Limestone, Concrete, Crystallized Glass/Porcelain Slabs and Porcelain Pavers
Eliminate The Time-Consuming Calibration Process for Seamed Pieces
Nylon Guide and Rotary Touchier Assures The Edges Are Uniform
Equipped with A 5/8”-11 Female Thread and Internal Water Passage Holes
Fits On All Popular Water-Fed Polishers
How To Use
Press nylon guide down firmly on top of material and turn on polisher. Always apply sufficient downward pressure to prevent nylon guide from spinning. (Nylon Guide should not "Spin Freely" during operation). The purpose of the nylon guide is to ensure the Alpha® Profiler remains at the proper height so the profiled edge remains straight. The ball bearing/rotary touchier within the Alpha® Profiler will control the depth of the grinding action to ensure that the profiled edge remains straight and consistent. The application is complete when the operator no longer hears a grinding noise, and the run-off water is clear.
Helpful Hints
Use of a C-Shape handle is recommended for this application. Alpha® Profilers are WET USE ONLY for LOW-SPEED applications. Do not allow the nylon guide to free-spin during application as scratches on the surface of material may occur from slurry residue. The Alpha Professional Tools® logo on the nylon guide should be clearly displayed during profiling application when using the Alpha® Profiler correctly. Use plenty of water during application. Use of water will flush away excess slurry from surface.
