Womens 1 Inch Skinny Red Leather Belt Gold Buckle Set Double Layer

If you are after a belt to last a lifetime, look no further. Ladies 1 inch (25mm) wide leather belt. Two layers of highest quality leather assure an even finish on both back and front sides. Lollipop red Horween Cavalier tanned leather on top has a beautiful soft feel, and a pronounced pull-up effect. The bottom layer is natural tan Harness leather. The layers are fused with a non-toxic, environment-friendly water based adhesive, then stitched with heavy-duty thread, to prevent splitting and stretching. Lollipop red Horween Cavalier tanned leather on top has a beautiful soft feel, and a pronounced pull-up effect. The bottom layer is natural tan Harness leather. Tonal red stitching, buckle and double loop set in light gold finish, and brass Chicago screws for easy buckle changing. Made in America with pride.



Our belt size is measured from where the leather folds around the buckle (without the length of the buckle itself) to the center hole, not to the very tip. Generally, your belt size is a size up (2 inches) from your waist size or pant size. But it is always a good idea to measure yourself, just to make sure. The best way to tell your correct size is by measuring an existing belt. Take a belt that fits you well, and measure it from where the leather folds around the buckle to the hole you are currently using. That would be your exact size. Another way of telling your correct size is by measuring your waist line. Using a flexible tape measure, measure around your waist where you would normally where your belt. Be sure to measure over your clothes, since that is how you will wear your belt. That measurement is the exact size you need to order. Remember, ideally, you would want your belt to fit in the center hole, so if your measurement does not come up to an exact number, round up to the closest available size.