NASHBAR FLATBAR DISC ROAD BIKE FRAMESETNEW TAKE OFF / SHIPS IN 24HRSCOMPONENTS:Frame: Aluminum, Disc Compatible*, Rack MountsFork: Steel, Disc Compatible*, Rack MountsHeadset: FSA, Semi-Integrated / Internal Style, ThreadlessBottom bracket: Square Tapered, JIS, Sealed Cartridge typeSeat: CionnliPost: AlloyStem: AlloyPost clamp: Alloy, quick releaseWeight: 10.73lbs of Everything. Size 19" used for images andweight.Condition: New take off from new in box unused bikes. Partswere removed from it. Includes:FrameForkHeadsetStemSeatSquare tapered bottom bracketSeatpostSeatpost ClampCOMPATIBILITY:Wheelset: 700c / 29er (Not meant for mountain tires)Brake: Disc only, see note below1Bottom bracket shell: 68mm English threadedCrank compatibility: Square tapered (if included bottom bracketis used)2Front derailleur: 31.8mm, bottom pullHub spacing / Type: 100mm / 135mm, Quick ReleaseBar compatibility: 25.4mm (if included stem is used)Stem: 1-1/8" threadlessTires: 700c / 29er. Please note, we cannot determine the maximumtire width capable. Such a test is impossible to conduct for all tiresof all manufacturers.NOTES:Disc brake mounts are essentially compatible with nearly allcaliper types. Rotor size will depend on the bracket / adapters used.The mount on the frame is a special one - it allows the use of 140mmrotors in rear. MOST post mounts are 160mm without any adapters. To usea rotor larger than 140mm, 20mm / 40mm brake adapters would be requiredfor 160mm / 180mm rotors, respectively. The fork is compatible onlywith 160mm or larger rotors. Front mount: I.S. (generally an IS to Post Mount adapter isused for most calipers)Rear mount: Post Mount 140mmSquare tapered crank only comes in the length the bike wasoriginally equipped with. It is very likely your square taperedcrankset will work with it, but it is not guaranteed. A differentlength may be required given your crank.GEOMETRY:WE APOLOGIZE, BUT NO GEOMETRY SPECS ARE AVAILABLE ANYWHERE, IFTHEY EVER WERE. PLEASE CONSULT ONLINE RESOURCES TO DETERMINE THE SIZEBEST FOR YOU.