FRY-20 New 20T Hydraulic Cylinder Jack Mini Hydraulic Ram Low Profile Lifting Cylinder

20 Tons 26mm Stroke Hydraulic Cylinder Jack Low Profile Lifting Ram Multi Stage

Great Durability--The main material of this jack is hard and strong 45 steel. It can withstand great weight without deformation or twisting. It has a long service life.

Strong Lifting Force--This jack has a strong lifting force of 44092 pounds, so it can lift a lot of heavy objects. The strong lifting force can meet your most lifting needs well.

Multi-section Design--Multi-section jacks can be used in narrower and lower spaces. In addition to the height of the jack body, the two pistons also increase the stroke so that the jack can lift higher and be more convenient to use.

Specification

• Model: FRY-20
• Color: Orange
• Product Type: Hydraulic Jack
• Main Material: 45 Steel
• Range of Application: Lifting Equipment
• Oil Capacity: 41cc
• Section Quantity: 2
• Connector Model: ZG-3/8
• Use Angle: 360 Degrees
• First Section Tonnage: 20T/44092lbs
• Second Section Tonnage7T/15432lbs
• Total Tonnage: 20T/44092lbs
• First Section Stroke: 1cm/0.39inch
• Second Section Stroke: 1.6cm/0.63inch
• First Section Piston Diameter: 5cm/1.97inch
• Second Section Piston Diameter: 3.1cm/1.22inch
• Total Stroke: 2.6cm/1.02inch
• Closed Height: 5.7cm/2.2inch
• Product Size: 10*7.6*5.7cm/3.9*3*2.2inch

Notes

• 1.For proper operation, all cylinders need to be connected to a solid lifting surface. Using thin cylinders on sandy, muddy or loose surfaces can cause cylinder damage.
• 2.This jack needs to be used with a pump. The pump is not included in the package.
• 3.This multi-section jack's pistons will not retract automatically after use, so you need to retract them manually.
• 4.It is normal for hydraulic products to have slight oil leaks due to the long-term transportation process. When not using the hydraulic pump, please tighten the sealing plug and seal the joint with a small bag and rubber band to avoid oil leakage.
• 5.The bottom should be flat and tough when using hydraulic jacks. For the safety of use, it is recommended to use oil-free wood, which can expand the pressure-bearing surface. In addition, to avoid sliding, you can not use iron plates to lift things.
• 6.Please lift the weight slightly before use to check for any abnormality. After checking, please raise the object steadily. Do not arbitrarily lengthen the handle or excessive operation.
• 7.When multiple hydraulic jacks are working at the same time, someone should direct them to move up and down at the same time. Two adjacent hydraulic jacks need to be supported by wooden blocks to ensure that the gap does not slide.
• 8.When using hydraulic jacks, please always pay attention to the sealing parts and pipe connections to ensure their safety and reliability.
• 9.The hydraulic jack is not suitable for use in places with acid, alkali, or corrosive gases.
• 10.It is not suitable for automobiles.
• 11.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.