1 Pair Sand Milling Sheets Can be Used in The Model 150 General Grinder (Not Included), for Grinding Slurry in The Home, Mill or Store, Vajra Sand, Grinding Assistant, Sturdy and Durable (White)

How to Install

1. Open the front cover of the machine(not included), remove the grinding disc, and then loosen the screws(not included) that fix the grinding sheets and take them out.

2. Reinstall the new grinding sheets back to the original grinding sheets position and lock the screws(not included), but please do not lock them first. Then, observe the gap between the inner circle of the grinding sheets and the mounting step, and adjust the gap to ensure uniformity.

3. Concentric with the motor shaft and then tighten the screws(not included).

How to Adjust

1. Put the moving grinding disc back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it.

2. Start the motor and tighten the adjusting screw clockwise until the grinding piece rubs a sharp sound. Turn off the switch after the motor idles for two minutes.

3. Open the front cover, take out the product, observe the friction marks of the moving grinding piece and the static grinding piece tooth groove, and touch the grinding piece around the hand. If the friction marks on the grinding piece are evenly distributed, and the heat difference of the grinding piece is not obvious. This means that the grinding plate is installed in balance and can be used without adjustment.

Specification

Material: Vajra Sand

Color: White

Applicable Model: #150 General

Assembly Required: Yes

Mount Type: Grinding Machine

Number of Pieces: 2

Net Weight: 1kg/2.2 lbs

Gross Weight: 0.9kg/1.98 lbs

Product Diameter: 14.6cm/5.75in

Diameter of the Largest Hole: 6.2cm/2.44inch

Product Thickness: 2.1cm/0.83in

Package Size: 15*15*6cm/5.91*5.91*2.36in

Package Included

1 Pair* Sand Milling Sheets