Paintless Dent Repair Hail Removal T Bar Slide Hammer+18pcs Glue Puller Tabs
material: Metal
How to use this paintless dent repair kits
1.Clean the dent with a clean wet cloth;
2.Mount the into the glue , pull the trigger to let the enter into the glue , connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Packing lncluded:
18x Glue Pulling Tabs
1x 2 in 1 Dent Removel T Bar Tools
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
