Foxwell SD101 EVAP Smoke Tester Smoke Machine Detector Leak Pipe Diagnostic Tool
Foxwell SD101 EVAP Smoke Tester Smoke Machine Detector Leak Pipe Diagnostic Tool
Hero image 0 of Foxwell SD101 EVAP Smoke Tester Smoke Machine Detector Leak Pipe Diagnostic Tool, 0 of 9
Foxwell

Foxwell SD101 EVAP Smoke Tester Smoke Machine Detector Leak Pipe Diagnostic Tool

(No ratings yet)

Key item features

  • Foxwell SD101 is an entry-level pipeline leak detection tool. It can quickly and accurately locate leaks in any pipeline system, help technicians and automotive users quickly solve problems, and reduce diagnostic time.


    Foxwell Smoke Diagnostic Leak Detector Features
    ✳️The C-shaped embedded structure design has a stronger sense of hierarchy, making it not only a car repair tool, but also a handicraft.
    ✳️A brand new smoke generation device with patented technology. Compared with peer products, at the same smoke concentration, it consumes less electricity and less e-liquid.
    ✳️With the support of frequency conversion technology, even under high temperature protection, it can meet daily testing needs without the need to stop and wait. 10 minute work cycle.
    ✳️Compared to the 5-minute working cycle of peers, a longer testing time means it can meet the testing needs of more systems, such as the cab, large volume piping systems, water tanks, and so on.

    Why You Need a Smoke Leak Detector？
    ✔️Your diagnostic tool partner: The use of smoke leak detector, you can quickly and accurately determine whether the fault is caused by pipeline leakage, but also quickly find the leak point.
    ✔️Engine fault code, 60% related to pipeline, it will help you avoid problem: If the relevant value detected by the sensor on the car exceeds the standard range, the ECU will store the corresponding fault code and automatically trigger the engine fault light. Maintenance personnel need to check for various pressure problems. Most pressure problems are caused by a leak somewhere. Using the smoke detector, it is easier to quickly find the problem and clear the fault code.
  • ✔️Convenience for Using: Smoke leak detector, because of the characteristics of smoke, can carry out leak detection on the whole set of pipelines, visual operation, omni-directional, no dead angle, and no leakage point.
    ✔️Operation safety: The smoke leak detector does not need to ignite the engine when it is used, but finds the leak point by simulating the real-time working condition of the engine when the engine is static. It is very safe for people or cars, effectively avoiding production accidents.
    ✔️Improve productivity: Smoke leak detector can effectively improve the speed of vehicle maintenance, thereby improving the utilization rate of the station, as well as personnel efficiency, improve productivity.


    Product Features
    Smoke leak detector, due to the characteristics of smoke, can perform leak detection on the entire pipeline, with visual operation, all-round, no dead corners, and no missing leakage points.
    ✴️Short smoke output time: Output a large amount of smoke within 10 seconds, greatly reducing diagnostic time and improving work efficiency.
    ✴️Simple and practical: With easy-to-use features and hook design, the conical adapter and airbag adapter can adapt to most air intakes.
  • ✴️Overheat and antifreeze protection: The smoke detector is equipped with the latest intelligent protection devices. When the temperature of the equipment exceeds 75 degrees Celsius, the power protection device will intelligently start and shut down to ensure the safety of the operator and equipment. If the device operates continuously for more than 15 minutes, it will be protected from overheating for a protection time greater than 10 minutes. This device is also suitable for low-temperature operation. Only car batteries with a full capacity of 12V are supported.


    Wide compatibility
    The Foxwell SD101 automotive smoke leak detector is suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats.


    How to Test It?
    1️⃣Inject 10ml-20ml of test oil into the smoke leak detector, filling 20ML of test fluid, under standard working conditions, can be used continuously for about 10 minutes;  (about Smoke Oil: advise use the Baby oil)
    2️⃣Open the pipe that needs to be connected with the leak detector.
    3️⃣Install the airbag adapter into the sealed pipe and connect the device to the smoke conduit.
    4️⃣Connect the leak detector to the DC12V battery and the device will start working.  NOTE: red clamp tp positive(+), and black clamp to negative(-)
  • 5️⃣The pipe will be filled with smoke and the leakage point will be checked.
    6️⃣Test the leaking pipeline, under the premise of sealing accurately, generally about 1 minute can be filled with smoke, if there is a leak, within 3 minutes, you can observe the results.


    Packing List

Current price is $72.99
Price when purchased online
  • Free shipping
  • Free 30-day returns
Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

How do you want your item?

How do you want your item?
Columbus, 43215
Arrives between May 7 - May 9
|
Sold and shipped by ANCEL Official Store
4.560344827586207 stars out of 5, based on 232 seller reviews(4.6)
Report an issue with this seller
Free 30-day returns - in store or online

About this item

Product details

Specifications

Warranty

Customer ratings & reviews

0 ratings|0 reviews
This item does not have any reviews yet