"
Product Feature:
1. APPLICATION: Body Mount Bushings Kit Fits 1999-2014 Silverado and Sierra. For Standard Cab 2/4WD Silverado/Sierra 1500 with Oval Upper Mounts. (Check below for Fitment references)
2. FUNCTION: Replace the worn out rubber bushings. Keep a firm connection between the body and frame and maintaining your cab to bed alignment.
3. MATERIAL: Manufactured from quality polyurethane. Outperform even new OE rubber bushings and last much longer without deteriorate.
4. BENEFITS: Precisely made to be a direct-fit, exact replacement. Holds super grease for quiet operation. Provides necessary rigidity.
5. A MUST HAVE: Polyurethane body mount bushings will replace those worn down stock rubber bushings and keep a firm connection between the body and frame.
Product Description:
7141 Body/Cab Mount Bushing Kit Black For 1999-2014 Chevy Silverado/GMC Sierra 2500 (Set of 24)
Replace the worn out rubber bushings.
Keep a firm connection between the body and frame and maintaining your cab to bed alignment.
Body Mount Bushings for Silverado and Sierra | 7141
Only work with Oval Upper Mounts.
Please re-use the old hardware, no bolts or nuts are included.
A More Durable Option
Manufactured from Polyurethane
Polyurethane Body Mount Bushings will replace the worn out rubber bushings on 1999-2014 Chevrolet Silverado/GMC Sierra 2500.
Rubber bushings almost always need to be replaced the longer they remain on a truck since oils, road grime, and heat will eat away at rubber.
Polyurethane outperform the rubber one and hold their shape much longer.
Symptoms of worn body mount bushings
Misaligned cab and bed
Difficult to open or close doors
Have gap between the door and body
Little clearance between the frame and other components
7141 Body/Cab Mount Bushing Kit (Set of 24)
FIT MODELS
Chevrolet Silverado 1500 2WD - 1500 - 1999 - 4WD - 1500 - 2014
Chevrolet Silverado 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2014
Chevrolet Silverado 2500 HD 2WD - 2500HD - 2001 thru 2WD - 2500HD - 2006
GMC Sierra 1500 2WD - 1500 - 1999 thru 4WD - 1500 - 2014
GMC Sierra 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2004
Instructions:
1. SPRAY liberally all mounting bolts and nuts to be removed with penetrating oil (ie. WD-40).
2. Vehicle body properly before removing mounts. SUPPORT (: Use a 2”x4” piece of wood 24” long or any other suitable RECOMMENDED size between the jack and body panels to spread the load out so as not to damage body panels). If necessary, support the body in several areas.
3. All nuts and bolts but DO NOT REMOVE. Working from one side of the vehicle at a time the nut and bolt from ONE LOOSEN REMOVE mount location and raise body enough to replace mount, NEVER HIGHER. Check other areas of the body for interference problems when raising the body.
4. One mount at a time with similar size urethane mounts. If washers/sleeves have been provided, use in combination of original.
5. After all mounts have been replaced, TORQUE ALL NUTS AND BOLTS TO FACTORY SPECIFICATIONS. -NOTE: RE-TORQUE all nuts and bolts after initial settling of mounts (approximately 1000 miles of driving).
"
