COARSE / SISAL MOP
-Suitable for removing scratches and bad staining as well as paint and rust.
-Fast cutting first stage polishing mop.
-Coarse buffing wheel used for the 1st stage of metal polishing
-Removes light marks left from preparation and are usually suitable for use with a grey compound
-Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and non-ferrous materials
-Fastened together with leather washers for maximum support when using the mop
-British Manufactured mops
-Suitable for use with a bench grinder / polishing machine
-Used on a taper spindle
SPECIFIC SPECIFICATIONS
-DIAMETER OF THE MOP - 6" (150mm)
-WIDTH OF THE MOP 0.5" (1 ROW) (12.5mm)
-MAXIMUM SPEED 3000RPM
WHITE CLOSE STITCHED MOP
-Multi layered and tight stitched polishing mop to provide a top quality durable mop
-Manufactured from 100% white cotton
-Very versatile polishing and buffing wheel used for the first cut, general polishing or finishing.
-Suitable for a number of materials including aluminium, alloys, brass, copper, steel and stainless steel
-Normally used in the middle stage of the polishing process and are usually used with green compound
-Good for a one shot polishing operation where you need the brightness back and the condition of the metal is not marked / scratched or badly pitted
-Fastened together with leather washers for maximum support when using the mop
-Suitable for use straight away
-British Manufactured mops
-Suitable for use with a bench grinder / polishing machine
-Used on a taper spindle
SPECIFIC SPECIFICATIONS
-DIAMETER OF THE MOP - 6" (150mm)
-WIDTH OF THE MOP 0.5" (1 ROW) (12.5mm)
-MAXIMUM SPEED 3000RPM
G LOOSE UNSTITCHED FLOPPY MOP
-Suitable for the final stage polishing and finishing on non-ferrous and ferrous surfaces
-Most popular grade of finishing mop
-100% cotton discs
-Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and non-ferrous materials such as plastics
-Also suitable for use on woods and resins
-Fastened together with leather washers for maximum support when using the mop
-Does not fray or leave as much dust as other finishing mops
-British Manufactured mops
-Suitable for use with a bench grinder / polishing machine
-Used on a taper spindle
-Suitable for use straight away
-Normally used in the final stage of the polishing process and are usually used with blue compound
SPECIFIC SPECIFICATIONS
-DIAMETER OF THE MOP - 6" (150mm)
-WIDTH OF THE MOP 0.5" (1 ROW) (12.5mm)
-MAXIMUM SPEED 3000RPM
