Xtenzi Bluetooth Wireless 12V RCA AUX Adapter Dongle for Car Stereos Boat SUV

This Xtenzi RCA-to-BT dongle (Xtenxi-A2DP BT0) is designed to produce audio out from RCA and send audio to car stereo or any audio receiver, when streamed via a BT compatible device such as a smartphone or portable MP3 or Music Player. This means that the dongle is hooked up one way only. PLEASE NOTE: This product is NOT designed to get an audio signal to your phone (its the other way around via BT)*** Things to Note or Pay Attention to when Installing: · Make sure your connections are not loose. Ensure wires are properly twisted and taped to prevent any damage. · Both power wires are properly connected to the device (Red Wire to +12V and Black Wire to Vehicle/System Ground. · Any loose connection can cause interruption in the proper functioning activity of your dongle product. Installation Instructions: Plug the Dongle RCA to the back of the stereo AUX and pair with BT via phone. Generally, the Xtenzi Dongle can hang loose behind your stereo next to the wiring harness. If you try to hook up the reversed way, the device/product may not work or will get damaged. How to Install · Connect the Red-Black Wire to 12V Source by splicing it into your stereo power wires · Connect Male RCA Audio to Audio source in of the Stereo/device. · Then open Bluetooth setup in your Smartphone or tablets and search the device. · Click to connect and you’re all set to listen to your favorite music.