Carver 7INF10BF-10 Styled-to-Fit Boat Cover for Blunt Nose Inflatable Boats - 10'6", Slate Gray

Blunt Nose Inflatable Boat Cover fits a centerline length of 10'6" and a beam width of 66". Designed for use with outboard motor installed. Outboard motor will be covered over within the body of the cover. If motor extends past the tubes, add length to the centerline of boat to determine the correct cover size. Does not have allowance for roll bar. Does not have console allowance. Styled-to-Fit Boat Covers are an excellent choice for mooring, trailering, or storage. The Poly-Flex II material is an economically-priced 5.3 oz. 100% Solution-Dyed Marine Polyester with polyurethane finish coating. 300 Denier x 300 Denier. Poly-Flex II colors are part of the polyester fiber itself so the color goes completely through the fiber instead of being just on the surface. Lightweight and strong. Good resistance to tearing, fading and rot. Good sun blockage. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Join seams are folded four-ply (no raw edges). Double stitch construction for added strength and durability. Weather-resistant anti-wick thread is used throughout construction. Double reinforced tie-down loops are sewn into the hem and 1/4" strong and durable shock cord is encased into the hem for a snug fit. Support poles (sold-separately) are recommended to prevent water from pooling and to help prolong the life of the boat cover. If mooring, suction cup tie-downs or mooring bags (sold separately) may be necessary to properly secure the cover to the boat. Product contents: (1) Boat Cover and (6) Heavy Duty Tie-Down Straps.