Homhougo—Outop Battery Terminals Car Battery Cable Terminal Clamps Connectors Negative and Positive One Pair

Description:

Name: Battery Terminal

1. Product material: brass

2. Product features: red positive electrode, black negative electrode.

3. Product function: Connect the battery and battery cable, open the device, etc.

4. Scope: General, battery, etc.

5. Product advantages: Copper is better than aluminum alloy because aluminum alloy has weak contact points and strong corrosiveness, which is better than zinc alloy. Due to zinc alloy's strong corrosiveness, brass is preferred, and the product is equipped with a protective sleeve.

6. Anode opening: 17-19 mm.

7. Negative electrode opening: 15-17 mm.

8. Precautions: Before installation, ensure that the battery is in a power off state.

9. Installation steps:

Step 1: Remove the positive and negative clamps of the original vehicle from the battery pack and separate them from the battery harness (note: the positive electrode is thicker than the negative electrode: conventional positive electrode 13-15mm, negative electrode 11-13mm).

Step 2: Connect the wiring harness to the new battery bracket and lock it with the screws on the connector (note: if the original terminal ages, it can be replaced with a new terminal);

Step 3: First install the positive stage, place the new battery bracket on the battery post, and adjust the sealing with screws. The installation method of the negative tool holder is the same as the previous one.

Packaging content:

1 positive clamp.

1 female clip.