A manifold is a pipe fitting with several lateral outlets for connecting one pipe with others such as a wide and/or bigger pipe, or channel, into which smaller pipes or channels lead. A pipe fitting or similar device that connects multiple inputs or outputs. A tube (tubular section, tubing, or hollow cylinder) usually but not necessarily of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids. Plastic tubing is widely used for its light weight, chemical resistant, non-corrosive properties, and ease of making connections. A tube may also reference a florescent light bulb or a housing of lamps or LEDs. A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.
Specifications - Height: 7.65 in.
- Width: 19.8 in.
- Length: 16.15 in.
- SKU: PTSWN83405
WARNING: 
Pickup or delivery?