12 VDC Hydraulic Power Unit 2.6hp 2KW 3.66 GPM - 1167 PSI Max. 8 liter tank

For a larger view of images, right click on the image and select "Open in a new tab" Technical Drawing Link The hydraulic power unit provides hydraulic flow to cylinders, motors or other hydraulic actuators. The hydraulic power unit can be powered from a battery or other 12VDC power source. The base unit comes with 2hp motor, relieve valve and threaded pressure and tank ports. There are 3 pump options that limit the maximum pressure due to the horsepower available: 1.33 gpm pump = 3200psi max. recommended pressure 2 gpm pump = 2100psi max. recommended pressure 3.66 gpm pump = 1167 psi max. recommended pressure The flow rate is fixed but the pressure can be adjusted lower than the maximum recommendation Units come with a 0.7 gallon (2.5 liter), 2 gallon (8 liter) or 3 gallon (12 liter) tank. Up to four valve stacking blocks (Fluidhaus SCO-D part number) can be ordered with the power unit. The valve stacking blocks have a standard D03 (NG6) pattern to mount multiple valves directly to the power unit center block. The valves should be ordered separately for flexibility in the options required by searching Fluidhaus VSD6 series