ANCEL DM500 Odometer Correction Mileage Adjustment Tool OBD2 Scanner Diagnostic Tool Mileage Calibration Oil Reset Code Reader Full OBDII Functions

ANCEL DM500 is a professional instrument repair tool that is connected to the OBD2 diagnostic port for measuring AND calibration the mileage of the vehicle's instrument panel.

It supports Audi, Volkswagen, Mercedes Benz, Ford, Volvo, Jeep, General Motors, etc.More than 20 popular car brands.

Easy to use, with a wide range of models, fast operation speed, and durability.With various advantages, it can meet the needs of different users such as car repair shops and fast repair shops.

✅ ANCEL DM500 Features：

1. Full OBDII/EOBD Engine Check

2. Odometer /Mileage Correction /Adjustment

3. Read Odometer

4. Write Odometer

5. Data Backup

6. Data Recovery

7. Read Odometer

8. Oil Service Reset

9. Read & Clear DTC codes

10. Turn off MIL fault lamp

✅ Full OBDII/EOBD Engine Check：

1. Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. Retrieving I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O-2 Sensor Test:Allows retrieval and viewing of O-2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.

8. On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

✅ Support Car Models List:

Compatible With VW/Audi [A4L. A6L, A8L. polo, passat];

Compatible With Benz [W203, W204,W205, W222,W213];

Compatible With Ford [F150, FIESTA, FOUCS, MONDEO, TAANST];

Compatible With Chrysler/Dodge/Jeep [CHEROKEE,COMPASS, GRAND CHEROKEE, WRANGLER];

Compatible With Land Rover/Jaguar [RANGE ROVER, EVOQUE, DISCOVERY. XE, XF];

Compatible With PSA [C3XR. C4L,301, 308, 508]

and more

⚠️ Purchase Reminder ：

✅ Common Q&A:

Q1:Do I need to disassemble the instrument panel to modify the mileage

A1:No need, the repair of equipment and instruments is communicated through the OBD2 diagnostic port, without the need to disassemble the instrument panel.

Q2:Does it support modifying engine running time

A2:Not supported. Some instruments will read and require the input of engine running time during repair, but the device cannot modify it. Generally, the input of time only needs to be based on the mileage read

Q3:Does it support engine mileage repair/transmission mileage repair

A3:Engine mileage repair not supported.The transmission currently supports resetting the mileage of some Volkswagen DSG transmission types (adjusting the mileage to 0 kilometers)