LUBRIPLATE SYN LUBE HD 680 HEAVY-DUTY, EXTREME PRESSURE, POLYALPHAOLEFIN (PAO)-BASED FLUIDS L1004-062 (55GL/DRUM)

DESCRIPTIONLUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are high performance, extreme pressure synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. They are zinc-free.LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are available in (5) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680) and are designed for many extreme and stringent applications. ADVANTAGESLUBRIPLATE SYN LUBE HD SERIES ISO VG 150 -680 fluids provide several advantages over mineral oilbased products.Excellent thermal stability and oxidation resistantcharacteristics increasing the service life of the lubricantmany times over that of mineral oils. Outstanding extreme pressure and anti-wear propertiesresulting in extended drain intervals and longerequipment life. Exceptional demulsibility characteristics. High viscosity indexes and low pour points to ensureoptimum performance over a wide operating temperaturerange. Broad range of compatibility with elastomers and sealmaterials. Exhibit very low coefficients of friction and superior heattransfer characteristics, resulting in lower operatingtemperatures and reduced power consumption. Compatible with mineral oils. APPLICATIONSPROPERTY TEST METHOD TYPICAL RESULTS* ASTM SYN LUBE HD 150 SYN LUBE HD 220 SYN LUBE HD 320 SYN LUBE HD 460 SYN LUBE HD 680 Viscosity: cSt @ 40°C ASTM D-445 162199310440705cSt @ 100°C ASTM D-445 2125354768SUS @ 100°F ASTM D-445 816988154521913384Viscosity Index ASTM D-2270 154154157164170Pour Point °F/°C ASTM D-97 1.176471################1.0869571.046512Flash Point °F/°C ASTM D-92 540/ 282 540/ 282 540/ 282 550/ 288 555/ 291 Fire Point °F/°C ASTM D-92 590/ 310 580/ 304 585/ 307 585/ 307 580/ 304 Specific Gravity ASTM D-287 0.8550.85710.85860.85970.8628Color ASTM D-1500 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max Neutralization No. ASTM D-974 0.30.30.30.30.3Copper Corrosion (Cu) ASTM D-130A 1a 1a 1a 1a 1a ISO Vis. Grade *** 150220320460680SAE Gear Oil No. *** 80W 9080W 140*** -90-140AGMA No. *** 4 EP 5 EP 6 EP 7 EP 8 EP 4-Ball Wear Test ASTM D-4172 0.34 mm 0.34 mm 0.34 mm 0.34 mm 0.34 mm Four-Ball EP (Weld Load) ASTM D-2783 315 kgf 315 kgf 315 kgf 315 kgf 315 kgf Timken (OK Load) ASTM D-2782 65 lbs. 65 lbs. 65 lbs. 65 lbs. 65 lbs. Conradson Carbon Residue ASTM D-189 Nil Nil Nil Nil Nil Emulsion Characteristics ASTM D-1401 40-40-0 (5) 40-40-0 (5) 40-40-0 (5) 40-40-0 (5) 40-40-0 (5) Rust Test Procedure B ASTM D-665 Pass No Corrosion Pass No Corrosion Pass No Corrosion Pass No Corrosion Pass No Corrosion Rotating Bomb Oxidation Test ASTM D-2272 >2000 >2000 >2000 >2000 >2000