R.S. Covenant 066 sz 10 4312 Silver CZ Butterfly

Stones: Only genuine Cubic Zirconia and Swarovski crystal are used to represent diamond-like styles. Genuine stones such as tiger eye, onyx, opal, garnet, amethyst and sometimes ruby, sapphire or emerald are also used. Beneath the Surface: The finish is the most important part of any piece of fine costume jewelry. Covenant rings have the best finish that money can buy. Every casting of brass-alloy or sterling silver is hand polished before going to the plater. Electroplating is a three stage process; first copper, then nickel and finally pure gold or precious rhodium are electronically bonded to the surface of the ring. In the case of our brass-alloy rings, Covenant’s is the only factory that inspects each piece during the plating process. After copper is applied, each ring is re-inspected to be sure the surface has no flaws. Any defects found are sent back to polishing before going back to plating. Silver rings are made using precious sterling silver. Sterling is the term used to define the highest standard for measuring silver. Specifically, it is an alloy consisting of 92.5% pure silver and 7.5% copper. This mixture of metals has led to the mark “.925” which is used by most manufacturers, including Covenant, to designate the purity of their silver products. After polishing, the rings are electroplated with a layer of precious rhodium, which gives them the look of white gold or platinum, and eliminates tarnishing.