Introduction:
Crawler pin remover for chain dismounting machine, using the principle of converting hydraulic energy into mechanical energy, is a special tool for dismantling the crawler pin of the crawler excavator. The electric pump is used as the power source to make the hydraulic jack move forward. Therefore, the pin shaft can be removed smoothly, which is a special tool for the maintenance and assembly of the crawler excavator.
Before the first test run, the tank must be filled with 46# hydraulic oil. Does not damage the track, and can prolong the service life of the track compared to the traditional way of replacing the track. Improve replacement efficiency and reduce labor intensity.
Parameter:
Rated voltage: 220V
Rated power: 1500W
Weight: 295.86lbs+89.73lbs
Chain range: <50mm/1.97in
Pressure sleeve range: <150mm/5.91in
Screw diameter:40/50mm(1.57in/1.96in)
Screw length: 1000mm/39.37in
Cylinder stroke: 100mm/3.937in
Operating pressure: 0-63Mpa
Pump station volume: 16L
Note:There will be a little error in manual measurement.
The product pump station is equipped with a plug.
The tank should be filled with hydraulic oil, and then powered on to start, otherwise the pump station will be damaged and pay for itself.
The pump station needs to add 46 # or 68 # anti-wear hydraulic oil by yourself.
Items Included: 022260-T
220V 100T Crawler Pin Dismantling Machine Electric Manual Hydraulic Excavator Maintenance Tool