For routing notches, grooves and edges. If you make small boxes, frames or furniture, this router attachment is the right size tool for you. Made from die-cast aluminum, with milled work surfaces. Used to route slots, notches, grooves, edges and profiles with or without the fence or circle attachment (both supplied). The adjustable depth stop provides a selectable travel stroke. The unit may be used free-hand, but as well as a drill or horizontal stand. The max. width of cut with fence is 5 7/8" (150 mm) and the circle diameter ranges from 3 7/8" to 15 3/4" (100 to 400 mm). The Router base OFV fits all MICROMOT rotary tool units with 3/4'' (20 mm) collar. Note: The Professional Grinder IB/E shown in the picture here is not included! Router Bits Made with tungsten carbit steel tips and with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Straight 1/8" (3,2 mm). NO 29024 Straight 3/16" (5,0 mm). NO 29026 Straight 1/4" (6,5 mm). NO 29028 Core box 1/4" (6,4 mm). NO 29030 V-groove 90° 1/4" (6,5 mm). Plunge 1/4" (6,5/2,5 mm). NO 29034 Piloted round over R 1/8" (3,2 mm). NO 29036 Rabbeting 1/8" (6,4 mm). NO 29038 Beading 3/32" (5,0 mm). NO 29040 Piloted cove 3/16" (13 mm). NO 29042 Tungsten carbit tiped Router Bit Set in wooden box Set with 10 profiles (cove, corner round, straight, beading, rabbeting, plunge, core box and V-groove). NO 29020 Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300 or the Router Base OFV. Free-hand use of these cutters is extremely dangerous! All new tools come with a 2 year factory .- SKU: PXTECH157
WARNING: 