Key Features
- Control the flow of a liquid using your computer or microcontroller
- 12V solenoid controlled fluid valve
- Operates at a minimum of around 3 PSI
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it's actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve. A garden hose or other pressurized system should work just fine.
Item Specifics
To control the solenoid from a microcontroller, you'll need to add a flyback diode and a MOSFET/Relay.
Basic robotics skills may be required
Basic DIY skills required
Basic electrical prototyping skills required
