2.5 in. Narrow Forged Johnny Joint 1 in. Left Hand Thread - 1.600 x .625 in. Ball

's narrow forged Johnny Jointfor fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2" diameter, fitted with a zerk fitting for greasing, 2 1/4" of 1"-14 left hand threads on the shank, and a 1.600" mounting width ball with a .625" thru bolt hole. Finished in gold zinc plating.

• Body Type: Forged Steel (Threaded)
• Body Series: 2 inch OD, Narrow Body
• Body Width: 1.2 inches
• Thread Size: 1 inch, 14 TPI
• Thread Direction: Left hand
• Shank Length: 2 1/4 inch
• Mount Width: 1.600 inches
• Hole Diameter: .625 inch (5/8)
• Misalignment: 22° Total
• Lubrication Method: External zerk fitting located on joint body
• Body Finish: Yellow zinc plating
• Country of Origin: United States of America