2.5 in. Narrow Forged Johnny Joint 0.875 -14 in. Left Hand Thread - 2.625 x 0.562 in. Ball

's narrow forged Johnny Jointfor fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2" diameter, fitted with a zerk fitting for greasing, 2 1/4" of 7/8"-14 left hand threads on the shank, and a 2.625" mounting width ball with a .562" thru bolt hole. Finished in gold zinc plating.

• Body Series: 2.5 inch OD, Narrow Body
• Thread Size: 7/8 inch, 14 TPI
• Mount Width: 2.625 inches
• Hole Diameter: .5625 inch (9/16, 14mm)
• Misalignment: 32° Total
• Country of Origin: United States of America