Features:
*Power input and output terminals (up to 16mm2 (5 AWG) cables can be connected).
*PE port terminal grounding wire can be connected
*red means power is on, green means power is off (circuit breaker tripped).
*Manual opening and closing handle: turn up to turn on the power, turn down to turn off the power.
*Test button, turn on the power and press this button to test whether the leakage protection function is good:
If the circuit breaker trips, the leakage protection function is good;
If the circuit breaker does not trip, there is a problem with the leakage protection function. Please replace the circuit breaker in time.
*Power-on indicator
*Ground indicator
*Leakage protection indication reset button, please press this button before power is restored
Specifications:
Rated current (ln): 6A,10A,16A,20A,25A,32A,40A,63A
Rated residual working current: 30mA (standard default)
Over-current fault: the circuit breaker and the residual current operating device are reset at the same time
Leakage fault: reset the residual current operating device first, then reset the circuit breaker
protection failure: the protection device is reset first, and the circuit breaker is reset later
Number of poles: 2P (single-pole two-wire residual current operated circuit breaker)
protection level: 3
Rated short-circuit capacity Lcb (A): 6kA
Insulation impulse voltage: 8KV
Electrical life: 10000
Mechanical life: 20000
Package Included:
1 x Circuit breaker
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
WARNING: 