Unique Bargains 830 x 450mm Black Car Sunroof Simulation Vinyl Film Roof Sticker Waterproof

Unique Bargains 830 x 450mm Black Car Sunroof Simulation Vinyl Film Roof Sticker Waterproof
Fit for roof wrapping,spcially design to simulate panoramic sunroof.
Waterproof and sun-resitant and  endure high temperatures.
Have air chnnel at the back to release bubble.
Pressure sensitive self-adhesive base making the installation process much easier.
Heat Stretchable using a heat gun or household hair dryer which allows more flexibility on curved corners.

Installation Guide:
Clean up the area to be trimmed to ensure that no dust and grease.
Torn the protective layer.
Spray some water on the back of the product and the area to be trimmed (So that can be easier adjusted)
Cut off the excess part.
Discharge the air and water with scraper or card (like bank card) to remove air bubbles.

Package Included:
1 x Car Sunroof Film
Installation:
1. Cean the car surface. First clean the car surface with water repeatedly to ensure that it is clean. Then use a dry scraper to scrape the surface from the dry side to the wet side, from top to bottom, and dry the edges with a cloth.
2. Cut the car film. Cut the car film to the actual size of the paint surface.
3. After the car film is cut, cover it on the outside of the paint surface, use a hot air dryer to heat the part that needs to be shaped, and at the same time use a scraper to stick the car film to the paint surface, and finally dry it with a towel.
4. Quality inspection. Check whether the paste is firm, whether there are bubbles between the car film and the paint surface, etc.