Hero image 0 of Miumaeov 43cc Weed Eater/Wacker 2-Stroke Gas Powered Lawn Edger Grass Trimmer Tools with 2 Blade Heads for Yard Garden, 0 of 16

Miumaeov

Miumaeov 43cc Weed Eater/Wacker 2-Stroke Gas Powered Lawn Edger Grass Trimmer Tools with 2 Blade Heads for Yard Garden

(No ratings yet)

Key item features

Sturdy and Durable: This product is mainly made of PP, aluminum alloy, manganese steel, and nylon, with high hardness, high abrasion resistance, anti-corrosion, anti-rust performance, and long service life.

High Power: The high-quality engine with 43cc displacement and power up to 1.25kw provides the product with super high speed (8500r/min ), thus effectively improving your working efficiency.

Two Blade Heads: The 2T cutting edge blade head with a roller is suitable for paddy pool ridge, crop field, etc. The multi-purpose mowing head is suitable for orchards, vineyards, etc., which can avoid accidentally injuring or cutting saplings when mowing.

High Comfort: The cordless design and gasoline power source make this product more suitable for outdoor use without the need for connecting cables and electricity, with high flexibility. The adjustable position of the handle allows you to control its direction freely and conveniently, thus making mowing easier and more precise.
Work Check:

Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.

Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge.

Please check whether the throttle cable is stable in the carburetor position before work.

Please check whether the blade is in good condition before work, and do not use a damaged blade.

Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.

Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.

Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Notes
The oil mixture ratio should not be wrong or deviated. Please do not use poor-quality motor oil as the matching motor oil.

Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use.

Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used. Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.

The sponge filter inside the air filter needs to be cleaned every 50 hours of work (the cleaning cycle should be shortened when the working environment is dusty), and it can be cleaned with detergent, shampooed with water, and dried before re-installing the air filter.

Before turning off the engine, it should idle for 1-2 minutes to facilitate the natural heat dissipation of the engine.

The blade work head gearbox is filled with grease once every 20 hours of work to provide internal gear lubrication to reduce wear and improve life.

The short flexible shaft and hard shaft inside the connecting disk should be withdrawn after each working cycle, greased and maintained, and then reassembled.

Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.

If you do not use the machine for more than 10 days, please pour out the oil in the gasoline and engine oil, and press the oil bubble to drain the fuel in the carburetor to avoid damage to the engine caused by oil deterioration.

If the machine is not used for a long time, please put the machine in a dry and ventilated place, and empty the fuel. Please avoid the high-pressure cap, spark plug, etc. from being unable to start due to humidity, rust, and inversion.

When the old machine is used the next year, please check the spark plug cap for rust and corrosion first to avoid weak power generation, which makes it difficult to start. After starting, it needs to idle for 10 minutes to see if the parts are working properly.

Specs

Brand
Miumaeov
Power type
Gas
Rec. use
Residential
String trimmer type
String Trimmers
Features
Edger Conversion Capable
Yard trimmer shaft type
Straight Shaft

Current price is $152.88

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $24.00

4-Year Plan - $29.00

How do you want your item?

Columbus, 43215

Arrives between May 2 - May 5

Sold and shipped by DL&WL

3.738396624472574 stars out of 5, based on 237 seller reviews(3.7)

Report an issue with this seller

Free 30-day returns - in store or online

More seller options (1)

Starting from $135.79

About this item

Product details

Description

Our weed wacker is powered by fuel for high power and safety. Two blade heads are available to meet your multiple-use needs. It starts up universally with two-stroke engines, so you can get to know how to use it quickly and accurately. It will be your powerful mowing assistant to help keep your lawn and garden neat and beautiful!

Key Features

Easy to Carry and Store: The carrying strap allows for easy carrying while lightening the load on your hands. Its detachable design ensures convenient storage when not in use.

Safety Protection: The throttle safety lock prevents accidental touching of the accelerating throttle and causing an accident to ensure the safety of users during operation.

Efficient Heat Dissipation: The multiple heat dissipation holes on the engine can effectively speed up the heat dissipation inside the engine, thus guaranteeing the efficient and smooth running of the engine.

Simple Assembly: Thanks to the long pole with a fastener design, complete installation components, and a detailed English manual, you can assemble this product or replace the blade heads easily and quickly.

Protective Shipping: Multiple packaging of foam shafts, bubble wrap, plastic bags, sponges, and rigid cardboard boxes can protect the product from wear and tear during shipping so that you can receive an almost non-destructive product.

Details

Large Fuel Tank: The 33.8 oz large capacity fuel tank ensure long-term use without frequent refueling.

Grass Baffle: It can effectively prevent the broken grass from splashing around when mowing the lawn, thus making it easier to clean up the lawn after mowing and ensuring your safety.

Funnel: The red funnel makes it easier to add fuel and less likely to leak.

Starting Method

1. Fill the fuel tank with well-proportioned fuel. (Mixing ratio: 1:20-25 for FB/FC grade engine oil, 1:40-50 for FD grade engine oil)

2. Press the fuel bubble under the carburetor until the fuel bubble is full of fuel.

3. Turn the off switch to the "I" position.

4. Pull the starter rope.

5. When there is a starting response, close the damper and pull the starter rope again.

6. After starting, open the damper.

7. Cycle to accelerate the warm-up machine work.

8. For the first 10 hours of use, the oil mixture ratio should be a little thicker, then follow the normal ratio.

Application

This product is mainly used for home lawn mowing, orchard mowing, tea garden mowing, cutting rice and wheat, cutting corn stalks, reed harvesting, pond side weed removal, bushes cutting, etc., and mostly used in agriculture, forestry, landscaping, and urban greening.

Specification

Color: Red, Silver

Material: PP, Aluminum Alloy, Manganese Steel, Nylon

Assembly Required: Yes

Usage: Side-mounted

Displacement: 43CC

Power: 1.25kw

Rotation Speed: 8500r/min

Engine Type: Single-cylinder Air-cooled 2-stroke Gasoline Engine

Carburetor Type: Diaphragm Carburetor

Gasoline Oil Mixing Ratio: 20-25:1

Idling Speed: 2800-3200r/min

Fuel Tank Volume: 1000ml /33.8 Oz

Operating Noise: About 110db

Engine Size: 26*22*27cm/10.24*8.66*10.63in

Product Length: 1.75m/5.74ft

Gross Weight: 9kg/ 19.84 lbs

Package Size: 107*27*27 cm/42.13*10.63*10.63 in

Package Included

1 * Weed Wacker

1 * Oil Pot

1 Pair* Goggles

1 * Funnel

1 * Carrying Strap

1 * English Manual

All Accessories for Installation

Sturdy and Durable: This product is mainly made of PP, aluminum alloy, manganese steel, and nylon, with high hardness, high abrasion resistance, anti-corrosion, anti-rust performance, and long service life.

High Power: The high-quality engine with 43cc displacement and power up to 1.25kw provides the product with super high speed (8500r/min ), thus effectively improving your working efficiency.

Two Blade Heads: The 2T cutting edge blade head with a roller is suitable for paddy pool ridge, crop field, etc. The multi-purpose mowing head is suitable for orchards, vineyards, etc., which can avoid accidentally injuring or cutting saplings when mowing.

High Comfort: The cordless design and gasoline power source make this product more suitable for outdoor use without the need for connecting cables and electricity, with high flexibility. The adjustable position of the handle allows you to control its direction freely and conveniently, thus making mowing easier and more precise.
Work Check:

Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.

Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge.

Please check whether the throttle cable is stable in the carburetor position before work.

Please check whether the blade is in good condition before work, and do not use a damaged blade.

Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.

Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.

Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Notes
The oil mixture ratio should not be wrong or deviated. Please do not use poor-quality motor oil as the matching motor oil.

Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use.

Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used. Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.

The sponge filter inside the air filter needs to be cleaned every 50 hours of work (the cleaning cycle should be shortened when the working environment is dusty), and it can be cleaned with detergent, shampooed with water, and dried before re-installing the air filter.

Before turning off the engine, it should idle for 1-2 minutes to facilitate the natural heat dissipation of the engine.

The blade work head gearbox is filled with grease once every 20 hours of work to provide internal gear lubrication to reduce wear and improve life.

The short flexible shaft and hard shaft inside the connecting disk should be withdrawn after each working cycle, greased and maintained, and then reassembled.

Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.

If you do not use the machine for more than 10 days, please pour out the oil in the gasoline and engine oil, and press the oil bubble to drain the fuel in the carburetor to avoid damage to the engine caused by oil deterioration.

If the machine is not used for a long time, please put the machine in a dry and ventilated place, and empty the fuel. Please avoid the high-pressure cap, spark plug, etc. from being unable to start due to humidity, rust, and inversion.

When the old machine is used the next year, please check the spark plug cap for rust and corrosion first to avoid weak power generation, which makes it difficult to start. After starting, it needs to idle for 10 minutes to see if the parts are working properly.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

Miumaeov

Power type

Gas

Rec. use

Residential

String trimmer type

String Trimmers

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.