SCULPFUN-2 Engraving Machine with Automatic Air-assist System, 10W Engraver for Balsa Wood Carving, Replaceable Lens and Eye Protection

Features:
▶  Upgraded Engraving with Air Assist System: S30 series is equipped with an airassist 32-bit motherboard and a control-type air pump, which can intelligently control air-assist switch during engraving through LightBurn software M8 button, this makes engraving and cutting very , and is very suitable for manufacture of exquisite gifts.
▶  Excellent Engraving Performance: S30 10W  is suitable for frequent cutting, do everything faster; It can cut 10mm balsa wood and 6cm plywood at one time. And making it reach industrial-grade engraving accuracy with extremely solid and high- linear slide rail X-, no e wavy pattern in carving small items. 410*400mm large-area engraving can meet your various engraving needs.
▶  Built-in high pressure air assist nozzle: S30 series is equipped with high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under air pump, greatly improving cutting efficiency, and cutting speed is more than 5 times faster than that without air assistance. powerful airflow blows away residue, making cut surface very .
▶  Replaceable protective lens: Adopts innovative replaceable lens, greatly improves service life of , which is more than 10 times longer than other general . When lens is damaged or after long-term use, lens can be replaced to restore cutting power. A free lens is included with purchase, more lens can be easily purchased from SCULPFUN.
▶  Eye Protection and Safety Design:  equipped with a detachable eye , which will not dazzle even without glasses. If you don't need it, you can easily disassemble it.  presented A4 size steel pad can well table from damage. Isolate fire hazards. There is a very and eye-catching power switch on machine, you can directly and quickly turn off power in an emergency.
▶  Sturdy and Durable Frame: S30 series is made of high-strength aluminum alloy, its frame can bear to 50KG weight without damage, and is very durable. frame can be used for a long time and maintain high , only need to upgrade latest when machine needs to be upgraded.
▶  Innovative Expandable Design: you can purchase a Y- expansion kit to expand engraving area to 935x400mm; purchase an - expansion kit to upgrade to 935x905mm engraving area to better handle large engraving or cutting work. And there are precise scale lines on X- and Y- which is convenient for you to quickly measure size of engraved object. 

Specification:
Model: SCULPFUN S30
Power Input: 100-240V AC, 50/60HZ Output: 12V 5A
Engraving accuracy: 0.005mm
Engraving area size: 410*400mm
Machine power: about 84W
Motherboard: 32-bit air-assisted motherboard, reserve , card offline printing function. (Upgrade Kit sold separately)

Diode output power: 10W (note that this is light energy not electrical energy)
focus: 0.06x0.08mm
wavelength 455±5nm
Focusing method: fixed focus column + sliding device
protection cover: Equipped with a detachable protection cover to eyes. You can adjust it and down, or remove goggles.

Air pump:
Type: mainboard-controlled air pump, voltage 12V, 30L/min
Air hose inner diameter: 7.5mm

Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, , leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone
Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some boards, PCB boards
Operating software: LightBurn (with air assist function M8), GRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support system. Supported file formats NC, BMP, JP