2.5 in. Narrow Forged Johnny Joint 0.75 in. Right Hand Thread - 1.600 x 0.5625 in. Ball

's narrow forged Johnny Jointfor fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2" diameter, fitted with a zerk fitting for greasing, 2 1/4" of 3/4"-16 right hand threads on the shank, and a 1.600" mounting width ball with a .562" thru bolt hole. Finished in gold zinc plating.

• Body Type: Forged Steel (Threaded)
• Body Series: 2 inch OD, Narrow Body
• Body Width: 1.2 inches
• Thread Size: 3/4 inch, 16 TPI
• Thread Direction: Right hand
• Shank Length: 2 1/4 inch
• Mount Width: 1.600 inches
• Hole Diameter: .5625 inch (9/16, 14mm)
• Misalignment: 28° Total
• Lubrication Method: External zerk fitting located on joint body
• Country of Origin: United States of America