Restored Klipsch CDT3650C II InCeiling Speaker White (Each) (Refurbished)

Product Highlights Klipsch CDT-3650-CII In-Ceiling Speaker:

• 1" tweeter with with swiveling Tractrixhorn
• Pivoting 6-1/2" IMG woofer
• Power handling: up to 50 watts RMS (200 watts peak)
• Frequency response 63-23,000 Hz (±3dB)
• Sensitivity 93 dB
• 8-ohm impedance
• Paintable SlimTrim™ magnetic grille
• Treble attenuation switch
• Cutout dimensions: 8-3/16" diameter
• Mounting depth: 4-1/2"

What's in the Box

• One Ceiling-mount Klipsch CDT-3650-CII In-Ceiling Speaker
• White metal mesh grille
• Cardboard template
• Owner's Manual (En/Fr/Sp)
• Controlled Dispersion Technology (CDT)
  The Klipsch CDT-3650-C II in-ceiling speaker features a patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT). The tweeter and woofer are independently adjustable, allowing both the high and low frequencies to be directed toward the listening area.
• High Efficiency
  The high-efficiency design of the Klipsch in-ceiling speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 93dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
• 2-Way Driver Design
  The Klipsch CDT-3650-C II uses a high-quality 1" aluminum dome compression driver (tweeter) mated to an exclusive Tractrix Horn, combined with a 6.5" copper-colored IMG (injection-molded graphite) woofer in a 2-way design.
• Tweeter:
   There is a 1" aluminum dome tweeter mated to a swiveling 100° Tractrix Horn. The swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. The horn-loaded tweeter allows you to point the sound to a specific location, and has more controlled directivity than a conventional dome tweeter.
• Woofer:
  The 6.5" copper-colored IMG (injection-molded graphite) woofer can rotate a full 360°, and then shift 15° in any direction. The solid Injection Molded Graphite woofer cone has been strengthened for even more accurate bass reproduction.
• Speaker Terminals
  The speaker has a pair of spring clips that can accept up to 12-gauge wire or pin connectors.
• ABS Basket/Frame
  The CDT-3650-C II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
• SlimTrim Magnetic Grille
  With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
• Power Specifications Note
  The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.