12V 3-Gear Motorcycle Heated Hand Grips Waterproof Handlebar Heater Warmer Kit

Feature:
It heats up faster and is heated more evenly. It has been successfully tested for 8,000 times of wear resistance.
Built-in intelligent temperature control chip, three levels of adjustable temperature, intelligent temperature control is safer
Quick heating in 10 seconds, large heating area
The heating piece is fixed with , which is convenient and fast
With IP67 waterproof rating, the switch and handle cover can still work normally even if they are soaked in water. When the handle cover needs to be cleaned, just unplug the plug and it can be washed, which is very convenient.


Specification:
Name: Temperature controlled heated handle cover
Input voltage: DC12V
Product line length: 108CM (heater to switch) 146CM (switch to electric door lock)
Working temperature: -30°C---+100°C
Product power: high-end 20W, mid-range 15W, low-end 10W
Material: Composite fiber heating wire + wear-resistant cloth, (L bracket) stainless steel
Installation method: pasted and fixed, L bracket lens base fixed
Wiring method: red is connected to the positive pole, black is connected to the negative pole (the light does not light up when connected reversely, it only generates heat)
Operation instructions: Power on: the red light, blue light, and green light flash once each and then go out.
Standby: The red light flashes when breathing, and automatically turns into a blue light when the temperature reaches a certain temperature.
Working status: The indicator light is always on (high range: the red light is always on, mid-range: the blue light is always on, low range: the green light is always on)
Switch gears: Click the switch key to switch gears
Note: If the positive and negative poles are connected reversely, the switch cannot be used and the electric heater will heat directly.
Universal Accessories = Yes

【pay attention】:
【1】Please choose the appropriate gear according to the ambient temperature. Under low temperature conditions, if you cannot accurately sense the temperature of the electric heating handle cover in time due to numbness in your hands, please use the low or medium gear first to prevent high temperature burns.
【2】This product is only suitable for motorcycles with 12V batteries. Please read the installation diagram carefully before installation. Wrong wiring method may cause component damage.
【3】This product can only be installed on the motorcycle handlebar and powered on. Before installation, you can use the battery to test whether the product is correctly powered on.
【4】It is strictly prohibited to operate with electricity (empty heating) when not riding, to prevent the electric heating handle cover from being too hot and damaging the handlebar.
[5] It is recommended to connect the electric door lock wire for wiring. Most models have a black positive pole and a green negative pole. It is recommended to use a multimeter to measure the specific situation.


Package Contents:
2*heated handles
5* cable ties
1*Bracket

Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.