Description:
Biaxial shredding machine, also known as shear shredding machine, is through cutting, tearing and extrusion to reduce the size of the material shredding machine. Widely used in waste plastic, waste rubber, waste cloth,wood, waste iron wire, waste aluminum wire, waste copper wire, kitchen waste and other waste.
Parameter:
Model: EB180
Voltage: 220V, 50Hz
Motor: 1500W 4-stage motor
Reducer: K47
Input speed: 25 rpm
Input torque: 400Nm
Input shaft diameter: φ35
Blade specifications and materials: Φ 90*8,9CrSi
Number of blades: 21 pieces
Inner cavity size (MM)： 180 * 180
Cutting mouth width (MM)： 270
Height of cutting mouth from the ground (MM)： 200
Application：
Industrial waste/Household waste: household waste, wood waste, kitchen waste, kitchen waste industrial waste, factory waste, municipal sludge, glass fiber reinforced plastic, pulp residue cloth;
Biomass: branches, leaves, straw, corn cob, wheat stalk, bark, banana tree, straw, garden waste;
Recycling waste: waste tires, waste paper, waste plastics, plastic bottles, chemical barrels, aluminum materials;
Destruction of product documents: computer hard drives, documents, unqualified products, expired drugs, plastic parts;
Waste treatment: medical waste, radioactive materials, organic waste, hazardous solid waste; Metal waste - paint drums, paint cans, iron oil drums, metal waste, aluminum waste.
Note：
A.Each time the material is placed, it should not exceed 20-30 cubic decimeters (0.02-0.03 cubic meters) and should not exceed one-third of the hopper. Do not fill the hopper with material at once.
B.The material should be placed at an interval of about one minute each time to avoid jamming due to the excessive speed of material placement.
C.If the machine gets stuck due to excessive material placement, immediately reverse the machine for a few revolutions and turn it forward again (black button). Do not feed until the machine is running normally.
D.Check the lubricating oil in the reducer every month to ensure that the lubricating oil is in the position of the oil window (as shown in the figure).
E.Inject appropriate amount of lubricating oil into the nozzle of the four bearing seats every week.
F.When the machine is not in use, it should be turned on idling for a few minutes every few days, (positive and negative alternately) so that the residue can be cleaned up as soon as possible.
Item included(021536):
Techtongda 220V Universal Biaxial Crusher
