This instrument kit is used to install instruments for vehicles, trucks, motor boats, yachts and other vehicles.
Good quality, can be replaced directly after purchase.
Product parameters:
* Fixed size: 52mm2-1 / 16
* Working voltage: 9-32 VDC
* Oil pressure: 10-184ohms, display 0-145 PSI
* 6 Gauges Set ,Speedo,Tacho,Fuel Level Gauge,Oil Pressure,Volt,Water Temp
* Fuel level: 240-33 ohms, E-F.
* Temperature: 287.4-22.4 ohm, display 100-250F
* Voltage: 8-16V
* Style: stainless steel plate
* Backlight: Red
* Fixing hole size: 52mm (2")
* -Operation mode: LCD display, stepping motor
Speedometer:
Application: motorcycle, truck, boat (the driving distance cannot be reset, just like on a car, and the mileage will continue to increase)
Working voltage: 9-32V
Fixed size: 85mm (about 3-3/8 inches)
Operation mode: LCD display with 7-color backlight
Indication range: 0-200KM / H
Signal: GPS
Weight: 327 grams
Tachometer:
Indication range: 0-8000 RPM
Operation mode: LCD display with red backlight
Description: Magnet movement gauge
Weight: 240g
Easy to set pulse/revolution.
Accept all input signals.
Small specifications:
Working voltage: 9-32VDC
Fixed size: 52mm 2-1/16.
Style: stainless steel plate
Background color: black
Backlight: Red
The weight of an item: 130g
Input range:
Oil pressure: 10-184ohms, display 0-145 PSI
Fuel level: 240-33ohms, E-F.
Temperature: 287.4-22.4ohms, display 100-250F
Voltage: 8-16V
Features:
☆ The needle is driven by the principle of moving magnet, which has good durability and vibration resistance.
☆ IP67 waterproof and dust-proof rating
☆ The stepping motor is suitable for the whole series of stepping gauges and has the characteristics of low power
☆ Large consumption, long life, high precision
☆ With curved glass (with anti- fog function)
☆ Using ultra-wide working voltage design (long-term working voltage: 9-32V, maximum reach: 36V (≤1 minute)).
The package includes:
1) 6*52mm gauge
2) 6*Multi-plug socket
NOTE:
Connection tips: the red + orange wire is connected to the positive pole, and the blue wire is used for the negative pole. And the black signal wire is connected to the sensor. (Voltmeter has no black wire)
Installation tips: Before installation, first make a hole in the panel (diameter: 52-53mm), and at the same time make sure there is a space (70mm in the backyard of the panel)
