Unique Bargains 2.5" Front Suspension Spring Strut Spacer Leveling Lift Kit for Dodge 1500 2500 3500

Description: About The Thickness: Lift Spacer Thickness and Lift is not a 1:1 Ratio due to the Suspension Shape. The actual thickness of the spacer is thinner than 2.5 inch front, but these spacers will raise the front end of your truck by a True 2.5 inch Front. This is a non-OEM product, accessory only! Improves the look of your truck and increases ground clearance, so you can fit larger custom rims and tires. An alignment is always recommended after altering the height of your vehicle.
Installation:
Step1: Safety first. Always block off your tires and make sure your vehicle is in the park with your emerg brake on.
Step2: Use a hydraulic jack (jacks from spare tire kits won't be sufficient) and jack stands to lift your front two wheels off the ground. Refer to your owner's manual for the correct jacking points to safely lift the vehicle.
Step3: Remove your tires and raise your suspension with a floor jack on the axle so that the spring is compressed slightly.
Step4: Remove the spring retaining clip, shocks, and sway bar link.
Step 5: Install the leveling kit on top of the front strut. Make Sure the bolts are tightened.