DZ47LE-32 2p C20 20A 230V earth leakage protection circuit breaker

● Rated current (ln): 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A

●Rated residual working current: 30mA (standard default)

● Function:

□ Over-current fault: the circuit breaker and the residual current operating device are reset at the same time

□ Leakage fault: reset the residual current operating device first, then reset the circuit breaker

□ protection failure: the protection device is reset first, and the circuit breaker is reset later

● Number of poles: 2P (single-pole two-wire residual current operated circuit breaker)

● Trip type: Type C (5～10) In (standard default) and Type D (10-16) ln (customized)

● Rated voltage Un (v): AC 220V-250V, 110V-127V (customized)

● Rated isolation voltage: 500V ● protection level: 3

● Rated short-circuit capacity Lcb (A): 6kA

● Insulation impulse voltage: 8KV

●Electrical life: 10000

● Mechanical life: 20000

Structure introduction:

1: Power input and output terminals (up to 16mm2 (5 AWG) cables can be connected).

2: PE port terminal grounding wire can be connected

3: Status , red means power is on, green means power is off (circuit breaker tripped).

4: Manual opening and closing handle: turn up to turn on the power, turn down to turn off the power.

5: Test button, turn on the power and press this button to test whether the leakage protection function is good:

If the circuit breaker trips, the leakage protection function is good;

If the circuit breaker does not trip, there is a problem with the leakage protection function. Please replace the circuit breaker in time.

6: Power-on indicator

7: Ground indicator

8: Leakage protection indication reset button, please press this button before power is restored

Package includes:

1*Circuit breaker