199 Gear 12V Relay Spot Welder Kit Adjustable Mini Spot Welder Welding Tools

Features:

- Brand new and high quality
- Made of material, durable
- Model: batteries (for lead-acid batteries), Model airplane batteries (for remote control batteries), Car machine treasure (for car machine) (optional)
- Applicable battery:
- A. Lead-acid battery:
- 12V14AH-100AH can be used (14AH battery needs to be fully charged and welded firmly)
- B. Farad capacitor:
- 3 super farad capacitors can be charged in series to 8V to weld 2.7V 3000F super farad capacitors (up to 4 farad capacitors in series)
- C, car starting battery:
- The output interface of the starter battery must be EC5, with a peak current of less than 1500A
- D. Aircraft Batteries:
- Please use XT60 interface, 3S-4S 3000mah aircraft model battery discharge rate is above 60C


instruct:
-1. Gear position adjustment: Rotate the encoder to adjust the gear position (the number is flashing), click the encoder to select 'OK' (the number is always on, it is the welding state), and the gear position is 01-199
-2, switch machine: long press the encoder for 3 seconds to switch machine
-3. Warn: For the 5 time use, please start debugging from the gear, and slowly increase the gear. After adjusting the appropriate gear, do not increase the gear at will, so as not to burn the motherboard if the gear is too large

Spot welding skills:
-1. Please adjust slowly from the gear when using, and do not increase the gear after the spot welding is firm
-2. When spot welding, keep the contact surface between the nickel sheet and the battery electrode flat, and touch it lightly when spot welding

Package Included:

1*set 199 gear 12V relay spot welder kit (optional)

Notes:

1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.