Features:
* New and high quality
* Made of high-quality materials, durable
* Are you still worried about the insufficient power and torque of your motor?
* The new generation of motors will help you solve all defects.
* THE SHAFT DIAMETER OF THE 895 MOTOR IS THE SAME AS THAT OF THE 775 MOTOR, AND THE 775 MOTOR IS 5MM.
* Just replace the motor and bracket, and the power supply can be upgraded at a low cost. Let's get started!
* The 895 motor can also be used as a generator. The faster the speed, the higher the voltage and current.
* 895 is widely used in micros: cutting machines, belt conveyors, lathes, milling machines,
* Bench drill, hand drill, polishing machine, bead machine, lawn mower, wire saw, ba nd saw, electric grinder, engraving machine, scooter, etc.
* 895 low-speed model: 3000 rpm at 12V, maximum torque 5.2 kg, 6000 rpm at 24V, maximum torque 10 kg
* 895 high-speed model: 6000 rpm at 12V, maximum torque 4.2 kg, 12000 rpm at 24V, maximum torque 8 kg
* The starting current should be greater than 10A. Switching power supply
* Or it is recommended to use the battery.
* It is recommended to use 360W, 24V and 15A switching power supplies, and household 220V cannot be used directly.
Specifications:
Model (optional): 775 Single Ball Bearing, 795 Double Ball Bearing, 895 Double Ball Bearing
Material: Aluminum alloy
Shaft diameter: 5 mm (approx.)
Rated voltage: 12-24V
Rated current: 1.2A
Rated power: 100W
Rated speed: 775: 12000 rpm, 795: 10,000 rpm, 895: 6000 rpm
Rated voltage: DC12V -24V (12~24V voltage can be used for the same motor)
Steering: forward and reverse support (use forward and reverse switches or reverse connections)
Motor step height: 4.5 mm (approx.)
Motor stepping diameter: 18 mm (approx.)
Motor diameter: 48mm with magnetic ring 50mm (approx.)
Shaft diameter: 5 mm (same as 775 motor) (approx.)
Length of motor tail shaft: 6 mm (approx.)
Mounting hole spacing: 29 mm (approx.)
Mounting hole screw hole: M4 screw and M5 screw
Package Included：
1 x motor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
