Smart Buy 10.01 oz White Silicone Bathroom & Kitchen Caulk

Smartbuy Sanitary & Tile Anti-mildew silicone (for kitchen and bath) is an ultra-high performance, one-component neutral silicone caulking agent, providing superior adhesive effect, can be used in any environment, and quickly react with moisture in the air. It reacts and cures into a tough and elastic silicone rubber, especially to prevent the growth of mold under high humidity and temperature. Product name: Smartbuy Sanitary & Tile Anti-mildew special silicone (for kitchen and bath) Main ingredient: Silicone rubber Characteristic: 1. Contains anti-mold agent, it can inhibit the growth of mold in humid places. 2. It is suitable for most building materials with neutral curing and without pungent smell. 3. It can be used on overhead or vertical surface without sag. 4. It maintains elasticity for a long time with its moisture resistance, corrosion resistance, weather resistance, Ozone resistance, UV resistance. 5. It provides maximum flexibility and adhesion to withstand contraction and expansion caused by displacement and vibration. 6. It is easier to keep clean and stays cleaner longer. Concrete: One-component, neutral, moisture-curing, high-performance silicone sealant can be used for flexible interfaces, metal sheets, glass, natural stone and window frames. It has excellent sealing effects and can be used on most building materials, generate a durable and flexible waterproof interface. Instructions for use: 1. Can not be used on surface with ooze grease, plasticizers or solvents. 2. Can not be used in airlessness places. 3. Can not be used in an environment that is continuously immersed in water. 4. Can not be used on frosted or wet surfaces. 5. Can not be used for food packaging. Attention: 1. Remove dust or oil on the surface and keep it dry. 2. To keep the construction surface clean, it is recommended to use masking tape. 3. Cut off the neck of the pipe, attach a sharp mouth and cut an appropriate caliber. 4. Punch the caulk into the joints and level them with a spatula. 5. It takes about 5-10 minutes to dry and 24 hours to complete curing, depending on temperature and humidity. Precautions: 1. Please keep in a dry place and avoid direct sunlight. 2. Avoid contact with eyes, if accidentally touched, please rinse immediately and seek medical attention. 3. Please stay away from the reach of children. 4. In case of skin contact, wipe with a towel or cloth, then flush thoroughly with water. 5. Construction temperature 5°C∼40°C (41°F~104°F). 6. The temperature range after curing is -40℃~180℃ (-40°F~356°F). Warning: 1. May cause skin allergies. 2. Wear protective gloves, masks and goggles during construction. 3. For hygiene and safety reasons, the clothes taken off must be washed/decontaminated before they can be reused. 4. Send the contents/containers to an approved waste treatment plant for disposal. Shelf life: Store under 5°C∼25°C (41°F~77°F) for 12 months Specification: 10.1 Fl oz (300ml)