Solar Panel Bracket Fastening Balcony Power Plant Photovoltaic Trapezoidal Rail

Assembly

1. Roof division depending on module dimensions

2. Align the first row using a chalk line.

3. Place the T20 holder in position, pre-drill with a Ø 5.00 mm sheet metal drill and fasten with blind rivets. Alternatively: fasten with thin sheet metal screws without pre-drilling.

4. Place the next rows using a wooden template. After 10 rows check the direction again with a piece of string.

Details:

*The profile sections are pre-punched and covered with sealing tape.*Material: Aluminum alloy

*Color:silver

*Rail Size: 200mm

*Quantity: 1set, 2set, 4set

Package Contents:

1x Rails（with accessories Gasket+3*Screw）

Or

2x Rails（with accessories Gasket+6*Screw）

Or

4x Rails （with accessories Gasket+12*Screw）

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.