Pen Type Gas Soldering Iron Portable Small Gas Soldering Iron Household Welding Repair Tools Gas Soldering Iron Tip Accessories
Features:
[Cordless Gas Soldering Iron]
This cordless soldering iron is a powerful electronic repair tool, delivers up to 35-45minutes run time.No electricity needed, it is convenient for indoor and outdoor use, such as finishing, heat shrink, plastic cutting, all kinds of soldering, and more.
[Small and Portable]
It is a popular pocket-sized butane powered soldering iron torch kit, ideal for quick repairs of circuit boards and electronics, at home, in the car or in the field.It fits in your pocket and is to power on and solder, wherever you are.
[Rapidly Heat Up & Temperature ]
It heats up rapidly and the temperature is adjustable, delivering soldering temperatures up to 842℉ (450℃), and a max torch temperature up to 2400℉ (1300℃).The adjustment button can control the gas output and temperature, usually placed it in the middle position.
A must have soldering machine for electronics, hobbyists and DIY enthusiasts.
Product Description:
Note: Do not inflate the gas soldering iron more than two-thirds, otherwise the nozzle may become clogged, affecting use. Products will be tested before leaving the . There may be a little bit of gas remaining, but it will not affect use! ! !
Note: The product is shipped without gas, so you need to bring your own! !
1. Filling gas
1. Use gas to fill, and make sure the is turned OFF before replenishing.
2. Insert the gas tank into the hole and press down to inflate.
3. It will take about 10 seconds to complete filling the gas. Wait a few minutes for the gas to stabilize before use.
4. If there is a hissing sound at the tail the gas is poured in, press the tip of the pen slightly into the port to it.
2. Ignition
1. Replace the soldering iron tip
2. Push the to the ON position and hear a "hissing" sound.
3. Push the electronic to with a lighter.
4. Light the fire and burn for 3 minutes. When the fire goes out, the soldering iron tip will continue to heat.
5. Adjust the flame size;
6. The temperature of this product is as high as 1300 degrees (soldering iron temperature is 450 degrees). Please attention to when using it. use, turn the to the OFF position.
7. When using a gas soldering iron, please special attention to waiting until the flame is completely eliminated and the inside the soldering iron turns red before operating to extend the life of the soldering iron tip.
3. Things to note:
1. When replacing the connector, please wait until it cools down before replacing it or replace it in advance.
2. The soldering iron tip in use is hot and hot. Please do not it with your hands.
3. The adjustment button can control the gas output volume and temperature. It is usually placed in the middle position.
4. Allow to cool down use before storing. Do not place in high temperature or direct sunlight.
5. It is not suitable for children to use and must be placed in a proper place when collecting.
6. Please use canned gas for filling, and keep away from fire sources when filling.
7. Because there is more or less slag in the gas, it is necessary to clean the nozzle frequently.
8. When cleaning, press the nozzle on the gas tank outlet to spray to achieve the cleaning effect.
9. Avoid heavy falls.
1* 4 in 1 gas soldering iron tool
Key words: