![R & D Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity ... [800-041]](https://i5.walmartimages.com/seo/R-D-Marine-13558776-R-D-Engine-Mount-W-4-Footprint-5-8-Stud-70-201lbs-Capacity-Per-Mount_a19791f5-c872-409e-95eb-d1a4ea81a184_1.b7eda15061a873087dcdc92d28a2af0f.jpeg?odnHeight=573&odnWidth=573&odnBg=FFFFFF)
Hero image 0 of R & D Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity ... [800-041], 0 of 2
R & D Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity ... [800-041]
(No ratings yet)
Key item features
- Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.How To Select (details required):1.Define the total weight of the engine and the transmission.2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine).3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine).4.Determine the stud necessary stud diameter and footprint of the mount.5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range.Example:Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4", stud diameter is 5/8".Total weight is 590lbs.590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037Why R&D Marine Engine Mounts?
- Designed for marine use, accepts propeller and engine thrust in both directions
- Offers a fail safe design
- R & D Marine Mounts are height adjustable
- Pre-loaded to reduce movement
- Slotted holes in base to assist in alignment
- Mount types to fit all applications Quick Guide (pdf)Brochure (pdf)
Specs
- BrandR & D Marine
- ColorMulticolor
- Has written warrantyNo
Current price is USD$104.37
Price when purchased online
Out of stock
How do you want your item?
Out of stock
About this item
Product details
Engine Mount w/4"" Footprint - 5/8"" Stud - 70-201lbs Capacity Per Mount
The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.
To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.
R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.
How To Select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight and th
The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.
To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.
R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.
How To Select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight and th
- Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity Per MountThe R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.How To Select (details required):1.Define the total weight of the engine and the transmission.2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine).3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine).4.Determine the stud necessary stud diameter and footprint of the mount.5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range.Example:Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4", stud diameter is 5/8".Total weight is 590lbs.590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037Why R&D Marine Engine Mounts?
- Designed for marine use, accepts propeller and engine thrust in both directions
- Offers a fail safe design
- R & D Marine Mounts are height adjustable
- Pre-loaded to reduce movement
- Slotted holes in base to assist in alignment
- Mount types to fit all applications Quick Guide (pdf)Brochure (pdf)
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it. Â
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Warnings
WARNING: âš WARNING: This product can expose you to some chemicals, which is known to the State of California to cause For more information, go to www.p65warnings.ca.gov.xn--ivgCustomer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
