Fashion Bed Group Deluxe Daybed Trundle Arms

The bed came with eight bolts to be used to attach the two ends of the bed (from the supplier) to the spring unit (to be provided by the customer.) The bolts had no slots, or any other means of tightening them. The underside of the bolt heads had a square-cut area which would presumably fit into holes in the ends and allow the bolts to be tightened. However the bed ends had no corresponding square area to keep the bolt from turning. Thus there was no way to properly tighten the nuts on these mounting bolts. I solve the problem by using different bolts that could be prevented from turning when the nuts were tightened. I also used locking nuts instead of the cap nuts supplied.