Technical Specification:
Plug Type: 9005 (High Beam) + H11 (Low Beam) + H11 (fog light)
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 11000LM/set (5500LM/bulb)
Operating Voltage: DC 12-24V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40 ~ +80 degree Celsius
Usage: headlight,fog light
Advantage:
*Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*Xenon white light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*All-in-one heat conduction system keep the light bulb in appropriate working temperature
*Built-in constant current CPU, instant full brightness without start-up relay
Package Include:
2 x Headlight High Beam Bulbs
2 x Headlight Low Beam Bulbs
2 x Fog/Driving Light Bulbs
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
