Universal dividing attachment UT 250

For accurate machining of circular work pieces. Used to manufacture sprockets, gears, ratchets, cams, etc. For fixation on compound table KT 150 and milling machines FF 230 and FF 500/BL.

Worm drive for divisions through 360°. Feed adjustment by handwheel with graduated, zero-adjustable dial (1 revolution = 10°). Unit may be fixed horizontally or vertically. For compound tables with distances between T-slots of 45 - 60mm. The flange of the dividing attachment is the same size as that of the main spindle of the PD 250/E lathe, thus 3 jaw chuck (NO 24 034) and 4 jaw chuck (NO 24 036) may be mounted.

Incl. faceplate Ø100mm and step clamp set of steel: Two each step blocks and clamps. With matching slot nuts, threaded rods and nuts. Packed in a wooden box.

NO 24 046

Note:
The work piece pictured here is not including in the delivery.

Returns can only be accepted for unused product in its original packaging. In addition to the returned item / items, a copy of the original packing slip or invoice is required. If proper paperwork is missing, PROXXON Inc. will not issue a credit. For warranty claims please call 1-877-776-9966. Please see our return and refund policy here.

California Residents Prop 65 Information

WARNING:
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov (https://www.p65warnings.ca.gov/) .