FRX Tremolo System
Key item features
- FRX Tremolo System
-
Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. The locking nut mounts behind your guitar's existing nut, in place of the truss rod cover.
The FRX locking nut has mounting holes on the left and right; only two wood screws have to be installed to mount the nut.
If your guitar has a lesser headstock angle than the standard 17° which will prevent the strings from seating properly in the existing nut, you will need the FRX Custom Locking Nut with Spacer instead. Please let us know if you are having this issue.
Watch Floyd himself guide you through the installation and set-up variations of this brand new tremolo system.
Installation instructions PDF
*NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed.
For tremolo dimensions, please see the PDF here. For nut dimensions, see here.
Please check the bridge measurements before purchasing or attempting installation. Some TOM-style bridges have slight dimensional differences.
*Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups.The FRX Tremolo is protected under U.S. Patent number 9,818,382 - By unknown
Specs
- CompatibilityLes Paul, SG, and Flying V-style guitars
- Brandunknown
- ColorGold
- Inst typeGuitar
- Has written warrantyNo
- ModelFRTX03000-GOLD
More seller options (1)
About this item
Product details
Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. The locking nut mounts behind your guitar's existing nut, in place of the truss rod cover.
The FRX locking nut has mounting holes on the left and right; only two wood screws have to be installed to mount the nut.
If your guitar has a lesser headstock angle than the standard 17° which will prevent the strings from seating properly in the existing nut, you will need the FRX Custom Locking Nut with Spacer instead. Please let us know if you are having this issue.
Watch Floyd himself guide you through the installation and set-up variations of this brand new tremolo system.
Installation instructions PDF
*NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed.
For tremolo dimensions, please see the PDF here. For nut dimensions, see here.
Please check the bridge measurements before purchasing or attempting installation. Some TOM-style bridges have slight dimensional differences.
- FRX Tremolo System
-
Floyd Rose continues its legacy of innovation with the brand new surface-mounting FRX Tremolo System for Les Paul, SG, and Flying V-style guitars. The FRX is a direct swap for the Tune-O-Matic and stopbar type bridge system, using the existing mounting stud holes and requiring no routing whatsoever. The locking nut mounts behind your guitar's existing nut, in place of the truss rod cover.
The FRX locking nut has mounting holes on the left and right; only two wood screws have to be installed to mount the nut.
If your guitar has a lesser headstock angle than the standard 17° which will prevent the strings from seating properly in the existing nut, you will need the FRX Custom Locking Nut with Spacer instead. Please let us know if you are having this issue.
Watch Floyd himself guide you through the installation and set-up variations of this brand new tremolo system.
Installation instructions PDF
*NOTE: On some Les Pauls, particularly LP Customs, the neck angle is not sufficient to allow the FRX to work without slight modification to the body. The receiving portion of the spring tension transfer rod on the base plate extends slightly below the bridge and may rest on the body unless a tiny channel is routed.
For tremolo dimensions, please see the PDF here. For nut dimensions, see here.
Please check the bridge measurements before purchasing or attempting installation. Some TOM-style bridges have slight dimensional differences.
*Note: If you plan on having the bridge in a full-floating mode, we highly recommend that you keep the nylon trem-assist ball post in place. This piece helps compensate the difference in leverage point on the FRX and the multitude of guitar setups.The FRX Tremolo is protected under U.S. Patent number 9,818,382 - By unknown
Specifications
Compatibility
Brand
Color
Inst type
Warranty
Warranty information
Similar items you might like
Based on what customers bought
FRX Tremolo System $280.50
$28050current price $280.50FRX Tremolo System
TP-0434-001 Short Trapeze Tailpiece $27.99
$2799current price $27.99TP-0434-001 Short Trapeze Tailpiece
Allparts Pot Bracket for Jazzmaster Pickguards $11.38
$1138current price $11.38Allparts Pot Bracket for Jazzmaster Pickguards
50x Guitar Screws Parts for Scratchplates Pickguard, Gold $5.67
$567current price $5.6750x Guitar Screws Parts for Scratchplates Pickguard, Gold
15 out of 5 Stars. 1 reviewsFrame for Mini Guitar 15mm $370.54
3 optionsAvailable in additional 3 options$37054current price $370.54Frame for Mini Guitar 15mm
LT-0899 Jumbo Fret Wire $10.89
$1089current price $10.89LT-0899 Jumbo Fret Wire
TBO Alder Replacement Body for Telecaster® $367.98 Was $396.58
$36798current price $367.98, Was $396.58$396.58TBO Alder Replacement Body for Telecaster®
PK-0148 Pack of 5 Tremolo Arm Tips $12.05
5 optionsAvailable in additional 5 options$1205current price $12.05PK-0148 Pack of 5 Tremolo Arm Tips
Schaller Roller Bass Bridge $234.78
2 optionsAvailable in additional 2 options$23478current price $234.78Schaller Roller Bass Bridge
Clearance Bridge Floating Replacement Guitar Lightweight Miss $12.20 Was $13.71
Clearance
$1220current price $12.20, Was $13.71$13.71Bridge Floating Replacement Guitar Lightweight Miss
Original Tremolo Claw Screws $12.50
$1250current price $12.50Original Tremolo Claw Screws
Waring 018794 Switch /Cb10 $126.32
$12632current price $126.32Waring 018794 Switch /Cb10
